When we handle fence cleaning in Howard, WI, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end.
How we clean it
Is it time for fence cleaning?
- Green growth on the shaded side
- Gray, weathered wood
- Orange or white sprinkler stains
- Dirty, dingy white vinyl
Why it gets dirty
- Shade and moisture along the fence line
- Sprinkler water with iron or minerals
- Sun weathering the wood
- Soil splash at the bottom
What you can do yourself
- Point sprinklers away from the fence
- Trim plants back from the fence so it dries
- Spot-clean vinyl with a soft brush and mild soap
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Gouging soft cedar and pine
- Cracking older, brittle vinyl panels
- Overspray onto the neighbor's property, cars and windows
How we handle fence cleaning
- Check the fence material and both sides' access
- Protect plants and nearby surfaces
- Apply the right cleaner and let it dwell
- Rinse at low pressure
- Brighten wood if it will be stained
Typical fence cleaning prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Local fence cleaning for Howard, WI
Decks and fences in Wisconsin spend months under snow, and the short summer is the only window to clean and refinish them. Plan deck staining for a stretch of dry days above about 50°F.
Much of Wisconsin has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.
Crews serve all of Howard (ZIP codes 54303, 54306 and 54313), plus Green Bay (3.8 mi), Hobart (4.3 mi), Ashwaubenon (4.3 mi) and Allouez (5.8 mi). Call (555) 010-0000 for a free quote in Howard.
Fence Cleaning: frequently asked questions
How much does fence cleaning cost in Howard, WI?
Fence Cleaning typically costs $200-$600 for a typical backyard fence (both sides of about 150 ft), and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for fence cleaning?
Fence Cleaning is done with low-pressure wash. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.
Is fence cleaning safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule fence cleaning?
Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.